Why Won’t My Car Start But I Have Power?

Why Won’t My Car Start But I Have Power?
15 / 100

Read other blogs from Car Dealerss today. When you turn the key to start your car, the engine emits a short, repeating chirping noise that is the starter turning the engine over so it can start running on its own power. It’s called “cranking,” and you want to hear it because it indicates that your car’s starter is working properly. But what if the engine starts to crank but refuses to start and run on its own? That indicates that the engine itself has an issue that makes it difficult for it to start. On this page from Car Dealerss, we’ll explain why won’t my car start but I have power and what has to be done to solve it.

5 Causes of a Car That Won’t Start But Still Has Power

Starter motor defect

When the car is started, the starting motor, which is attached to the engine, engages the flywheel. To get things going, the crankshaft is spun when the starter is activated. In the event of a starting malfunction, the engine is not given the necessary boost.

When you turn the key in the ignition, you won’t hear anything if the starter is broken, or you could hear a clicking sound. However, because the starter is in charge of this function, the engine won’t crank at all.

Faulty Solenoid Starter

Even if the starting motor is in good operating order, this system nevertheless can be the source of the issue. Sometimes the starting solenoid is to blame instead. Although some older cars have a separate solenoid, the solenoid is often found on the starter itself.

An erroneous starter solenoid prevents the engine from cranking or starting. Additionally, if this component has failed, you won’t hear a clicking sound.

A Poor Contact In The Transmission Range Selector

There is a range selection built into the automatic gearbox shifter. This component is also also referred to as the neutral safety switch. In some circumstances, it may have a weak electrical contact, which would make it more difficult for the engine to recognize whether it was in Park or Neutral.

If the situation is not hopeless, this problem may be easily fixed. Put the brake pedal all the way down and shift into neutral. Restart the engine if necessary. Put it back in Park and try again if it doesn’t work. The shifter may just need to be moved for that electrical contact to be restored.

Bad Wiring

To keep the automobile going, all of the wires that run from the switch to the starter must be in excellent shape. Massive starting problems may result if the wire is unplugged or damaged for whatever reason.

The vehicle may also stall if the wire from the ignition switch to the starting solenoid disconnects while it is in motion. You must look at how all the electrical wires are connected and how they are doing in order to identify the problem.

Additionally, you might want to check the battery again. Since the car can have some power, but not enough, try to jump-start it.

Seized Engine

It will be impossible for you to start the automobile if the engine seizes. However, since all of the electronics would be powered by the battery, there shouldn’t be any problems operating them.

Low engine oil or water intrusion might be the reason for the engine seizing. Overheating or severe engine wear are other contributing factors.

How To Fix

Repairing faulty wiring typically costs more in labor than it does in parts. Finding the damaged wire or connection is the first step, which might take a while if you aren’t sure what to search for. However, once you’ve located the issue, resolving it just calls for changing the wire or re-establishing the connection.

Because the engine has seized, the most expensive solution will be to replace or rebuild the motor. For some cars, a cost for components and labor might soon result from replacing the engine. This makes it the best decision only if your car still has worth.


Given that the vehicles still have electricity, you must think outside of the battery while doing repairs to determine why your vehicle’s engine isn’t running. The battery’s condition is not only shown by the fact that the car is still powered.

Once you ask it to do something, it stops functioning. It’s frequently a simple mechanical problem. You can uncover the problem with a little troubleshooting, though.

A mechanic may examine your vehicle and ensure that the proper component is replaced. Working with a professional helps ensure that the car gets fixed.

Read other blogs from Car Dealerss today.

Author Bio:
Austin Hunter

Austin Hunter is a car enthusiast who has spent more than 20 years racing, collecting, driving, and researching automobiles. In his free time, he loves to write articles regarding car innovation.